Drywall Products
|
Product Data Sheets
|
MSDS
|
- ULTRAKOTE L5 is a light-weight,
water-based, acrylic, high build, tintable,
leveler and finish plaster. It can be knife,
trowel, sprayed or roller applied.
Uses:
Use Ultrakote L5 as a finish or over existing painted textured surfaces
and new construction. Ultrakote L5 may also be used as a tintable
high performance leveler in preparation for paint or smooth wall.
|
Product Data |
MSDS |
Top
Base Coats and Adhesives
|
Product Data Sheets
|
MSDS
|
- ULTRAKOTE 1 CONCENTRATE is a proprietary
mixture of Portland Cement, fiber
and proprietary additives. Is a factory
blended and packaged in paper bags delivered
to jobsites.
Uses:
Ultrakote 1 Concentrate is recommended for either commercial or
residential projects requiring either One Coat or Scratch & Brown
stucco applications. Just mix with water.
|
Product Data |
SDS |
- ULTRAKOTE 1 PRE - MIX is a proprietary
mixture of Portland Cement, sand, fiber
and proprietary additives. Is a factory
blended and packaged in paper bags delivered
to jobsites.
Uses:
Ultrakote 1 Pre - Mix is one of the most cost eective product for
either commercial or residential projects requiring either One Coat or
Scratch & Brown stucco applications. Just mix with water.
|
Product Data |
SDS |
- SKIMKOTE is a polymer modified cement
base coat and surface leveler.
Uses:
Skimkote is a high-build cementitious coating for direct application
over EPS, stucco, gypsum sheathing, CMU, AAC, rastra and approved
ICF systems. Skimkote may also be used as a leveling coat over
prepared painted stucco or masonry.
|
Product Data |
SDS |
- FOAM-KOTE is a cement, silica sand and
100% acrylic polymer based material that is
used as an EPS insulation board adhesive
and / or a base coat.
Uses:
Foam-kote is primarily used as a base coat to embed reinforcing
mesh, as well as adhering EPS insulation board to approved
substrates. Foam-kote can be used as an adhesive over Dens Glass
Gold (ASTM C1177); water resistant core gypsum sheathing (ASTM
C1396). Foam-kote can also be used as an adhesive over concrete,
concrete masonry, stucco and other approved substrates.
|
Product Data |
SDS |
- PARAKOTE is a cementitious plymer modified
coating developed specifically as a
waterproof secondary all weather moisture
and air barrier. Use with Ultrakote 4" Transition
Mesh on all board joints and transitions
to maintain a continuous barrier.
Uses:
Parakote is a cementitious waterproofing material designed for use
over approved substrates such as Dens Glass Gold (ASTM C1711),
weather resistant core gypsum sheathing (ASTM C1936), concrete,
masonry, stucco and other approved substrates.
|
Product Data |
MSDS |
- SHURKOTE DB is a cement, silica sand and
100% acrylic polymer based material that is
used as an EPS insulation board adhesive
and / or a base coat.
Uses:
Shurkote db is primarily used as a base coat to embed reinforcing
mesh, as well as adhering EPS insulation board to approved
substrates. Shurkote db can be used as an adhesive over Dens Glass
Gold (ASTM C1177); water resistant core gypsum sheathing (ASTM
C1396). Shurkote db can also be used as an adhesive over concrete,
concrete masonry, stucco and other approved substrates.
|
Product Data |
SDS |
- SHURKOTE WB is a polymer based material
that is designed to be an EPS insulation
board adhesive and / or base coat.
Uses: Shurkote wb is primarily used as a base coat to embed reinforcing
mesh, as well as adhering EPS insulation board to approved
substrates.
|
Product Data |
SDS |
- ACRYLIC ADHESIVE is a 100% acrylic
based material that is designed to be an
EPS insulation board adhesive.
Uses:
Acrylic Adhesive is primarily used as an adhesive for adhering EPS
insulation board to approved substrates.
|
Product Data |
|
- REINFORCING MESH is a specially woven
glass fiber reinforcing mesh that meets
ASTM E 2098 for alkali resistances. It is
designed to be used with Ultrakote base
coats to provide impact resistances and
strength.
Uses:
Reinforcing Mesh is primarily used with Ultrakote polymer modified
base coats in accordance with EIFS specifications. It can also be used
to integrate EPS shapes and over stucco in restoration projects to
help resist cracking.
|
Product Data |
|
Top
Finishes
|
Product Data Sheets
|
MSDS
|
- ULTRA-FLEX XP expanded performance is
a premium, integrally colored elastomeric
resin texture coating with expanded
performance available in a variety of
texture and color options. Ultra-flex XP
utilizes new resin technology to provide
enhanced color retention and coating flexibility
to greatly improve performance over
myriad of substrates. Ultra-flex xp is
specially designed for use over Ultrakote
One Coat and Premix stucco basecoats.
Refer to the One Coat specification for
more information. All Ultrakote finishes
contain additives to resist mildew, algae
and fungus.
Uses:
Ultra-flex xp may be used either on the interior or the exterior, over
cementitious or non-cementitious base coats, prepared concrete or
masonry, prepared drywall, prepared painted surfaces or EIFS
synthetic stucco systems.
|
Product Data |
SDS |
- Duratex High Performance is a premium, integrally colored acrylic-elastomeric resin texture coating available in a variety of texture and color options. Duratex High Performance utilizes new resin technology to provide enhanced color retention and coating flexibility to greatly improve performance over myriad of substrates. Duratex High Performance is specially designed for use over Ultrakote One Coat and Premix stucco basecoats. Refer to the One Coat specification for more information. All Ultrakote finishes contain additives to resist mildew, algae and fungus.
Uses: Duratex High Performance may be used either on the interior or the
exterior, over cementitious or non-cementitious base coats, prepared
concrete or masonry, prepared drywall, prepared painted surfaces or
EIFS synthetic stucco systems.
|
Product Data |
SDS |
- DURATEX is a premium, integrally colored
acrylic based textured finish coating to be
used over a myriad of base coats including
Ultrakote’s One Coat and Pre Mix stucco
products, (refer to the One Coat Specification
for more information). Duratex is a
ready mixed aggregated finish material
available in multiple color and textures. All
Ultrakote’s finishes contain additives to
resist mildew, algae and fungus.
Uses:
Duratex may be used either on the interior or the exterior, over
cementitious or non-cementitious base coats, prepared concrete or
masonry, prepared drywall, prepared painted surfaces or EIFS
synthetic stucco systems.
|
Product Data |
SDS |
- SAND FINISH is a proprietary
mixture of Portland Cement, hydrated lime,
silica and / or marble sand and proprietary
additives. Sand Finish is available in #16
and #20 sand size.
Uses: Ultrakote Sand Finish is a premium ready-mixed finish texture material
for use over Ultrakote Traditional Stucco Cement. Paint follows the
Sand Finsh texture application.
|
Product Data |
SDS |
- TUSCANY ACCENT is a stain used in combination with UltraKote finishes to achieve an “Old World” or “Antique” appearance.
Uses: Tuscany Accent is for interior or exterior applications when the “Old Wrold” or “Antique” look is desired.
|
Product Data |
MSDS |
Top
Coatings
|
Product Data Sheets
|
MSDS
|
- STRETCHKOTE is a premium, integrally
colored elastomeric based decorative and
protective coating that provides excellent
crack bridging qualities. Stretchkote is
available in multiple colors. All Ultrakote’s
finishes and coatings contain additives to
resist mildew, algae and fungus.
Uses:
Stretchkote is an exterior elastomeric paint with high elongation
properties for bridging cracks in masonry, concrete, stucco or
synthetic substrates. Stretchkote offers excellent weather resistance.
A siliconized version is available by special order.
|
Product Data |
MSDS |
- STUCCOKOTE is an epoxy / acrylic decorative
and protective exterior paint used over
Ultra-flex, Duratex, Ultrakote Spanish
Texture, Ultrakote Sand Finish and field
mixed finished.
Uses:
Stuccokote is an exterior acrylic paint designed for use over high pH
surfaces as stucco, prepared masonry or concrete and has an excellent
adhesion to primed metal and wood surfaces.
|
Product Data |
MSDS |
- SHURGARD RA is an elastomeric all weather secondary moisture / air barrier that is either rolled or sprayed over approved substrates. SHURGARD RA complies with ICC-ES criteria for water resistive coatings (AC212).
Uses: Shurgard RA can be applied over a wide variety of substrates such as exterior grade gypsum sheathing, cement board and OSB. Shurgard ra is applied as a continuous membrane utilizing Ultrakote 4" Transition Mesh without voids or pinholes.
|
Product Data |
SDS |
- ACRYLI-KOTE is an epoxy / acrylic decorative and protective exterior paint user over Ultra-flex, Duratex, Ultrakote Sand Finish and field mixed finish.
Uses: Acryli-kote is an exterior acrylic paint designed for use over high pH surfaces as stucco, prepared masonry or concrete, and has an excellent adhesion to primed metal and wood surfaces.
|
Product Data |
|
Top
Primers & Conditioners
|
Product Data Sheets
|
MSDS
|
- ULTRAPRIME is an acrylic based protective
primer used over base coats, like Ultrakote’s
One Coat System, Shurkote WB,
Shurkote DB and drywall surfaces prior to
application of finish coat.
Uses:
Ultraprime is an exterior acrylic primer designed for use over high pH
surfaces such as stucco, prepared masonry or concrete and has excellent
adhesion to primed metal and wood surfaces.
|
Product Data |
MSDS |
- STUCCO CONDITIONER is an efflorescence
preventative blocker which may also be
used as a penetrating hardener and pH
neutralizer. May also be used as a primer for
acrylic and elastomeric finishes and other
synthetic stucco. Stucco Conditioner will
harden and restore soft stucco and other
cementitious materials.
Uses: Stucco Conditioner is designed for use over high pH cementitious
surfaces such as stucco, masonry or concrete. Stucco Conditioner can
also be used over existing painted stucco and masonry to help harden
or tighten the surface. Stucco Conditioner will increase coverage of
top coats and perform well in geographic regions where freeze / thaw
occurs.
|
Product Data |
MSDS |
Top
Bonders & Admixes
|
Product Data Sheets
|
MSDS
|
-
ULTRAKOTE ADMIX is a concentrated
water-borne acrylic polymer additive for
use with cementitious material.
Uses:
Ultrakote Admix, when diluted, is added to cementitious materials to
reduce cracking and shrinkage while improving tensile, flexural and
compressive strength. When added to cementitious material, Ultrakote
Admix will produce a polymer modified cement that will
increase freeze / thaw stability.
|
Product Data |
MSDS |
- ACRYLIC BONDER is waterborne acrylic
bonding agent applied over cementitious
or painted surfaces to improve adhesion.
Acrylic Bonder promotes a strong bond, but
also improves the curing, long term durability
and resistance of the finished product.
Uses:
Ultrakote Acrylic Bonder is applied over masonry or painted surfaces
to improve adhesion or acrylic or cementitious coatings. Ultrakote
Acrylic Bonder evens surface absorption, allowing a uniform overlay.
Ultrakote Acrylic Bonder may also be used to increase bond strength
between cementitious products.
|
Product Data |
MSDS |
Top
Mortars
|
Product Data Sheets
|
MSDS
|
- UltraMortar Type S is a proprietary mixture of Portland Cement, hydrated lime, ASTM C144 plaster sand and/or color pigments. UltraMortar Type S meets ASTM C 270 proportion and property requirements for type s mortar.
Uses: One Step mortar for placing brick, concrete block and stone. Use when high strengths are required (1800 PSI @ 28 days)
|
Product Data |
MSDS |
|